Quest 2100 sound meter parts info: for our equipment people

General discussions about Solo

Moderator: Mike Simanyi

Post Reply
User avatar
Mike Simanyi
Former Club Chair
Posts: 2460
Joined: Thu May 15, 2008 11:26 am
Club: No$
Car#: 6

Quest 2100 sound meter parts info: for our equipment people

Post by Mike Simanyi »

I'm putting this note in both the E-board and public forums, so people in need can access this info.

We use a Quest 2100 sound meter and have one of the extension cables; I believe the ICM-50. This is the same meter used by SCCA National.

Our extension cable is damaged - one of the ends was torn off. The terminators aren't a common standard, but they are available once you know what to order. Here are the parts at Mouser's site. They're available elsewhere as well (Digikey, perhaps Allied, etc.)

Female: https://www.mouser.com/ProductDetail/798-SR3010JE4S71
Male: https://www.mouser.com/ProductDetail/798-SR3010PE4P71

The female end can also be searched online by its manufacturer part number: SR30-10JE-4S(71)
And the male end: SR30-10PE-4P(71)



Also, the current "owners" of Quest sound meters is at https://www.tsi.com. They bought the business from 3M in 2018.
Post Reply