Who has JRI shocks?

General discussions about Solo

Moderator: Mike Simanyi

Post Reply
User avatar
Bob Pl
Posts: 697
Joined: Thu May 15, 2008 11:26 am
Club: GRA
Car#: 26

Who has JRI shocks?

Post by Bob Pl »

Just looking for new shocks and this name came up. I haven't bought any in 4 years so my shock knowledge is a bit dated.

Thank you if you have info.

:)
User avatar
Mike Simanyi
Former Club Chair
Posts: 2460
Joined: Thu May 15, 2008 11:26 am
Club: No$
Car#: 6

Re: Who has JRI shocks?

Post by Mike Simanyi »

I know Toby is strongly considering a set, but he doesn't have them yet.

Mike
User avatar
Bob Pl
Posts: 697
Joined: Thu May 15, 2008 11:26 am
Club: GRA
Car#: 26

Re: Who has JRI shocks?

Post by Bob Pl »

Mike Simanyi wrote:I know Toby is strongly considering a set, but he doesn't have them yet.

Mike
Thanks.

:)
User avatar
Toby Larsson
Former CSCC Overall Champion
Posts: 314
Joined: Thu May 15, 2008 11:26 am
Club: PSCC
Location: @4000ft.
Contact:

Re: Who has JRI shocks?

Post by Toby Larsson »

I'll be getting a set of DA JRi struts next month, should be able to give you feedback in March if you have time to wait.
http://www.elitetint.com" onclick="window.open(this.href);return false; http://www.osgiken.net" onclick="window.open(this.href);return false;
User avatar
Toby Larsson
Former CSCC Overall Champion
Posts: 314
Joined: Thu May 15, 2008 11:26 am
Club: PSCC
Location: @4000ft.
Contact:

Re: Who has JRI shocks?

Post by Toby Larsson »

They lasted for 24 hours at Daytona and finished third.
Attachments
1779975_690364704328609_1765609300_n.jpg
1779975_690364704328609_1765609300_n.jpg (52.99 KiB) Viewed 10492 times
http://www.elitetint.com" onclick="window.open(this.href);return false; http://www.osgiken.net" onclick="window.open(this.href);return false;
User avatar
Toby Larsson
Former CSCC Overall Champion
Posts: 314
Joined: Thu May 15, 2008 11:26 am
Club: PSCC
Location: @4000ft.
Contact:

Re: Who has JRI shocks?

Post by Toby Larsson »

And a video from the manufacturing plant in Mooresville NC

http://www.youtube.com/watch?v=bE-oZUsWEvI" onclick="window.open(this.href);return false;
http://www.elitetint.com" onclick="window.open(this.href);return false; http://www.osgiken.net" onclick="window.open(this.href);return false;
User avatar
Bob Pl
Posts: 697
Joined: Thu May 15, 2008 11:26 am
Club: GRA
Car#: 26

Re: Who has JRI shocks?

Post by Bob Pl »

Thanks Toby,

I need shocks on my c5z, so these may be the ones, or Penske's. I know over the years Penske/Koni has been the Vette shock but times change.

Don't like Koni's that much.

:)
User avatar
Toby Larsson
Former CSCC Overall Champion
Posts: 314
Joined: Thu May 15, 2008 11:26 am
Club: PSCC
Location: @4000ft.
Contact:

Re: Who has JRI shocks?

Post by Toby Larsson »

Well, the Penskes are tried and true, right?

It's always a bit of a gamble trying something new or different but the JRi's are priced well and all the tech stuff I've read sounds promising.

Here's the C5 package http://www.hancheyvehicletech.com/category/JRi.html" onclick="window.open(this.href);return false;
http://www.elitetint.com" onclick="window.open(this.href);return false; http://www.osgiken.net" onclick="window.open(this.href);return false;
User avatar
Bob Pl
Posts: 697
Joined: Thu May 15, 2008 11:26 am
Club: GRA
Car#: 26

Re: Who has JRI shocks?

Post by Bob Pl »

Toby Larsson wrote:Well, the Penskes are tried and true, right?

It's always a bit of a gamble trying something new or different but the JRi's are priced well and all the tech stuff I've read sounds promising.

Here's the C5 package http://www.hancheyvehicletech.com/category/JRi.html" onclick="window.open(this.href);return false;

Good enough, I'm ordering, thanks guys.

:)
User avatar
Mako Koiwai
Posts: 6490
Joined: Thu May 15, 2008 11:25 am
Club: SCNAX
Car#: 34
Location: South Pasadena, CA
Contact:

Re: Who has JRI shocks?

Post by Mako Koiwai »

The great thing about Penskes ... our own Guy Ankeny. Had a leak, took it over to Guys, rebuilt it right then and there: $50 :thumbup:
User avatar
Ed Holley
Posts: 739
Joined: Mon Jun 20, 2011 3:55 pm
Club: CASOC
Car#: 912

Re: Who has JRI shocks?

Post by Ed Holley »

Bob Pl wrote:Good enough, I'm ordering, thanks guys.:)
So, let me get this straight. If I sell my Miata AND add $1500 or so, I can purchase these shocks. Guess I won't be running with the Big Dogs anytime soon...or ever. :thumbup:
2012 ES Regional Champion
2001 NB Miata
User avatar
Toby Larsson
Former CSCC Overall Champion
Posts: 314
Joined: Thu May 15, 2008 11:26 am
Club: PSCC
Location: @4000ft.
Contact:

Re: Who has JRI shocks?

Post by Toby Larsson »

Mako Koiwai wrote:The great thing about Penskes ... our own Guy Ankeny. Had a leak, took it over to Guys, rebuilt it right then and there: $50 :thumbup:

Guy is who will be doing the custom strut housings with JRi internals for me. It was actually his suggestion since Penske struts are out of my budget ($10-$12K).

BTW you probably shouldn't advertise how much Guy is charging you because he likes you/done lots of work for you previously. I run in to this a lot in my own business when I do discounted work for various reasons and then other people expect to pay those prices. Just know that Guy will always do the job right with great follow up service for a fair price :thumbup:
http://www.elitetint.com" onclick="window.open(this.href);return false; http://www.osgiken.net" onclick="window.open(this.href);return false;
Gary Thomason
Posts: 99
Joined: Thu May 15, 2008 11:26 am
Car#: 0

Re: Who has JRI shocks?

Post by Gary Thomason »

Bob Pl wrote:Thanks Toby,

I need shocks on my c5z, so these may be the ones, or Penske's. I know over the years Penske/Koni has been the Vette shock but times change.

Don't like Koni's that much.

:)
Looking at SS results at the Nationals this last year, I see at least 4 of the top 5 finishing cars were on Konis (not sure what is on that silly German car, so might be 5 of 5). Now, I agree Konis, like anything else, have some drawbacks, but hard to argue they don't work well. The 2 top Corvettes were on Koni singles, BTW.

Food for thought anyway :idea:
GT
User avatar
Mako Koiwai
Posts: 6490
Joined: Thu May 15, 2008 11:25 am
Club: SCNAX
Car#: 34
Location: South Pasadena, CA
Contact:

Re: Who has JRI shocks?

Post by Mako Koiwai »

Yup, Guy's special price for Karen was more of a special follow up price. After all she bought a set of (expensive!) double adjustable Penske's from Guy and has two sets of Penske's fully rebuilt by him. That quick special was not for a "real" rebuild, ie. with new parts, but simply tightening something up I think that did require taking some of it apart. :thumbup:
User avatar
Bob Pl
Posts: 697
Joined: Thu May 15, 2008 11:26 am
Club: GRA
Car#: 26

Re: Who has JRI shocks?

Post by Bob Pl »

Gary Thomason wrote:
Bob Pl wrote:Thanks Toby,

I need shocks on my c5z, so these may be the ones, or Penske's. I know over the years Penske/Koni has been the Vette shock but times change.

Don't like Koni's that much.

:)
Looking at SS results at the Nationals this last year, I see at least 4 of the top 5 finishing cars were on Konis (not sure what is on that silly German car, so might be 5 of 5). Now, I agree Konis, like anything else, have some drawbacks, but hard to argue they don't work well. The 2 top Corvettes were on Koni singles, BTW.

Food for thought anyway :idea:
Thanks Gary, I had the single adj Koni for a while when they first released. They worked, but it frustrated the heck out of me when I would go full "minus" to count the sweeps and they would get stuck there. I broke several "tools" off trying to move the adjuster off the stuck position. Drove me nuts. Then there was the rubber bushing that would push out of place. I'd have to send it back to Koni to get it fixed every so often. Just too many "idiosyncracies" for me to put up with.

Come to SD when I get the JRI's on and drive my car (on a6), love to get your input. I'm at every practice & champ.

:) Bob
User avatar
Marshall Grice
Former CSCC Overall Champion
Posts: 1617
Joined: Thu May 15, 2008 11:27 am
Club: CASOC
Car#: 11

Re: Who has JRI shocks?

Post by Marshall Grice »

Bob Pl wrote:They worked, but it frustrated the heck out of me when I would go full "minus" to count the sweeps and they would get stuck there. I broke several "tools" off trying to move the adjuster off the stuck position. Drove me nuts.
i'm no expert, but aren't you supposed to count turns from full stiff?
User avatar
Bob Pl
Posts: 697
Joined: Thu May 15, 2008 11:26 am
Club: GRA
Car#: 26

Re: Who has JRI shocks?

Post by Bob Pl »

Marshall Grice wrote:
Bob Pl wrote:They worked, but it frustrated the heck out of me when I would go full "minus" to count the sweeps and they would get stuck there. I broke several "tools" off trying to move the adjuster off the stuck position. Drove me nuts.
i'm no expert, but aren't you supposed to count turns from full stiff?
Could be, maybe depends on the shock, maybe doesn't matter.

In any event, back on my point, they would stick jast as hard on full stiff.

Equally bad engineering, or their vendor quality control, or their assembly, zero difference to me as the end user.

Thanks for the post.

:)
User avatar
Bob Pl
Posts: 697
Joined: Thu May 15, 2008 11:26 am
Club: GRA
Car#: 26

Re: Who has JRI shocks?

Post by Bob Pl »

Marshall Grice wrote:
Bob Pl wrote:They worked, but it frustrated the heck out of me when I would go full "minus" to count the sweeps and they would get stuck there. I broke several "tools" off trying to move the adjuster off the stuck position. Drove me nuts.
i'm no expert, but aren't you supposed to count turns from full stiff?
Since I figure you might be interested in this, just from technical perspective, the ones I got adjust the rebound from full soft (neg. sign) and the bump from full hard (the pos. sign).

Here is a link to their catalog

http://www.jrishocks.com/wp-content/upl ... preads.pdf" onclick="window.open(this.href);return false;

:)
Post Reply