Page 1 of 1

Springs?

Posted: Tue Apr 01, 2014 7:37 pm
by Marc Leininger
Is there anyone located near Torrance of Pasadena that may have a pair of 6-7in x2.25-2.37in springs that are around 425lbs-500lbs?

Need to do a test fit for this weekend... by test fit I mean need some one to help save my ass :D

I think my rears are a bit to firm.

Re: Springs?

Posted: Wed Apr 02, 2014 12:09 am
by George Schilling
Marc Leininger wrote:Is there anyone located near Torrance of Pasadena that may have a pair of 6-7in x2.25-2.37in springs that are around 425lbs-500lbs?

Need to do a test fit for this weekend... by test fit I mean need some one to help save my ass :D

I think my rears are a bit to firm.
The closest I have are 6 x 2.25 x 600 if that will help. I'm in Lakewood.

Re: Springs?

Posted: Wed Apr 02, 2014 1:39 pm
by Marc Leininger
George Schilling wrote:
The closest I have are 6 x 2.25 x 600 if that will help. I'm in Lakewood.
Thank you very much Sir. I do in fact have 560# in the car right now. I do appreciate the offer though.

Re: Springs?

Posted: Wed Apr 02, 2014 5:46 pm
by Michael Sullivan
I have 7x2.25x500. You have my #.

Re: Springs?

Posted: Thu Apr 03, 2014 2:07 pm
by Bill Martin
Request you guys consider posting here:

viewtopic.php?f=8&t=5842&p=80938&hilit=springs#p80938" onclick="window.open(this.href);return false;

It was intended as an on-going forum resource for local buy--sell--trade of springs. Be good to bump it once in a while.