Course setup workers for Feb 25/26
Moderators: Mike Simanyi, Christine Grice, Rick Brown
- Stephen Yeoh
- Solo Chair
- Posts: 651
- Joined: Thu May 15, 2008 11:30 am
- Club: CASOC
- Car#: 88
- Contact:
Course setup workers for Feb 25/26
Hi,
I have 3 exemptions for course set up. I'm looking for 3 volunteers to help with course setup on Friday, right now approximately 1pm for course setup. I'm also looking for 3 volunteers to help change the course on Saturday after practice in preparation for Sunday. Please respond here and I'll check back and post here who's helping. Please let me know which day you can help. Priority will go to those that can help on both days.
The exemption means that if you help with course set up on Friday, you won't have to work on Saturday. If you help with course change over on Saturday, you will be exempted from work on Sunday.
Thank you!
I have 3 exemptions for course set up. I'm looking for 3 volunteers to help with course setup on Friday, right now approximately 1pm for course setup. I'm also looking for 3 volunteers to help change the course on Saturday after practice in preparation for Sunday. Please respond here and I'll check back and post here who's helping. Please let me know which day you can help. Priority will go to those that can help on both days.
The exemption means that if you help with course set up on Friday, you won't have to work on Saturday. If you help with course change over on Saturday, you will be exempted from work on Sunday.
Thank you!
Stephen Yeoh
Cal Club Autocross Chair
Cal Club Autocross Chair
- Mako Koiwai
- Posts: 6490
- Joined: Thu May 15, 2008 11:25 am
- Club: SCNAX
- Car#: 34
- Location: South Pasadena, CA
- Contact:
Re: Course setup workers for Feb 25/26
I don't think you get three fresh exemptions for Saturday's turn around of the course. The folks that helped on Friday typically help on Saturday ... that's usually part of the deal.
- Mike Simanyi
- Former Club Chair
- Posts: 2460
- Joined: Thu May 15, 2008 11:26 am
- Club: No$
- Car#: 6
Re: Course setup workers for Feb 25/26
Nope. Stephen's correct.
The people setting up for Saturday generally spend far more time working that setup than most people spend on course at the practice, and it's about even on time for the course conversion time / Sunday work group.
Mike
The people setting up for Saturday generally spend far more time working that setup than most people spend on course at the practice, and it's about even on time for the course conversion time / Sunday work group.
Mike
- William Colvin
- Posts: 54
- Joined: Mon Nov 22, 2010 10:15 am
- Club: GRA
- Car#: 375
- Location: Orange County, CA
Re: Course setup workers for Feb 25/26
Looks like i can make it on Friday for setup
Bill
Bill
Bill Colvin
- Stephen Yeoh
- Solo Chair
- Posts: 651
- Joined: Thu May 15, 2008 11:30 am
- Club: CASOC
- Car#: 88
- Contact:
Re: Course setup workers for Feb 25/26
Thank you Bill, will you be able to help Saturday evening as well?
Stephen Yeoh
Cal Club Autocross Chair
Cal Club Autocross Chair
- William Colvin
- Posts: 54
- Joined: Mon Nov 22, 2010 10:15 am
- Club: GRA
- Car#: 375
- Location: Orange County, CA
Re: Course setup workers for Feb 25/26
Stephen,
Put me down for Saturday switch over.
Put me down for Saturday switch over.
"Tell me and I forget. Teach me and I remember. Involve me and I learn." - Benjamin Franklin
- George Schilling
- Club Representative
- Posts: 5135
- Joined: Thu May 15, 2008 11:26 am
- Club: CASOC
- Car#: 66
- Location: Lakewood, CA
Re: Course setup workers for Feb 25/26
Looks like we still have two Friday set up workers positions to fill. This counts as your work assignment for Saturday. Also, we will adhere to the CASOC tradition of buying dinner for all those who show up and help regardless of whether you get a worker exemption or not.
CASOC Autocross Club, 1984 Van Diemen RF-84, 1600cc Kent, Hewland Mk9, Centerline 2 pc. wheels, Hoosier R25B, SuperTrapp, Zimmer Alloclassic titanium left hip w/Metasul LDH chromium-cobalt lg dia head
- Mako Koiwai
- Posts: 6490
- Joined: Thu May 15, 2008 11:25 am
- Club: SCNAX
- Car#: 34
- Location: South Pasadena, CA
- Contact:
Re: Course setup workers for Feb 25/26
... and the Broasted Chicken at Grazianos, the traditional CASOC dinner site is Well Worth It! I sometimes think it's the main reason Steve Collin's AX'sAlso, we will adhere to the CASOC tradition of buying dinner for all those who show up and help regardless of whether you get a worker exemption or not.
Re: Course setup workers for Feb 25/26
And, apparently, Seb does not belong to CASOC. Cause when I worked set-up for him all I got was "no, they go HERE!"George Schilling wrote: Also, we will adhere to the CASOC tradition of buying dinner for all those who show up and help regardless of whether you get a worker exemption or not.
2012 ES Regional Champion
2001 NB Miata
2001 NB Miata
- Mako Koiwai
- Posts: 6490
- Joined: Thu May 15, 2008 11:25 am
- Club: SCNAX
- Car#: 34
- Location: South Pasadena, CA
- Contact:
Re: Course setup workers for Feb 25/26
Rios r SCNAX
- Stephen Yeoh
- Solo Chair
- Posts: 651
- Joined: Thu May 15, 2008 11:30 am
- Club: CASOC
- Car#: 88
- Contact:
Re: Course setup workers for Feb 25/26
Thanks Theo, this will be your work assignment for Sunday then.
I'm still looking for two people to help with course set up on Friday and one more for Saturday. Any takers? It will count as your work assignment for either the practice or champ event, depending on when you work.
Thanks.
Stephen
I'm still looking for two people to help with course set up on Friday and one more for Saturday. Any takers? It will count as your work assignment for either the practice or champ event, depending on when you work.
Thanks.
Stephen
Stephen Yeoh
Cal Club Autocross Chair
Cal Club Autocross Chair
-
- King of Fastrack!
- Posts: 966
- Joined: Thu May 15, 2008 11:29 am
- Club: SCNAX
- Car#: 194
- Location: Oceanside
Re: Course setup workers for Feb 25/26
I can help on Saturday changeover.
http://www.osgiken.net
4 BSP- 2019 Mazda ND Miata - 2001 SSM Honda S2000
OS Giken / Bride / ShaftWorks USA
4 BSP- 2019 Mazda ND Miata - 2001 SSM Honda S2000
OS Giken / Bride / ShaftWorks USA
- Mark DeShon
- Posts: 473
- Joined: Mon Mar 09, 2009 8:57 pm
- Car#: 113
Re: Course setup workers for Feb 25/26
I was going to leave work early and head over tomorrow, but that wasn't going to be until about 2:30. Tell ya what, I'll try to make it earlier, but no promises.
Mark D.
Mark D.
- Stephen Yeoh
- Solo Chair
- Posts: 651
- Joined: Thu May 15, 2008 11:30 am
- Club: CASOC
- Car#: 88
- Contact:
Re: Course setup workers for Feb 25/26
Jon, thank you. You have an exemption for Sunday work.
Mark, whenever you can get there is fine. Thanks. You have an exemption for Saturday.
Is there anybody else that can help tomorrow? Even if you get there around 2 or 2:30, we sure could use the help.
Thanks. Stephen
Mark, whenever you can get there is fine. Thanks. You have an exemption for Saturday.
Is there anybody else that can help tomorrow? Even if you get there around 2 or 2:30, we sure could use the help.
Thanks. Stephen
Stephen Yeoh
Cal Club Autocross Chair
Cal Club Autocross Chair
- Eric Clements
- Solo Safety Steward
- Posts: 895
- Joined: Thu May 15, 2008 11:25 am
- Club: No$
- Car#: 30
- Location: Pasadena
Re: Course setup workers for Feb 25/26
I'll be there, probably a little later in the afternoon.
- Stephen Yeoh
- Solo Chair
- Posts: 651
- Joined: Thu May 15, 2008 11:30 am
- Club: CASOC
- Car#: 88
- Contact:
Re: Course setup workers for Feb 25/26
Thank you to everybody who took the time to come help with course setup. I really appreciated your time.
Stephen Yeoh
Cal Club Autocross Chair
Cal Club Autocross Chair