FS: USED/NEW Race Springs

[Jeff Wong]

Hypercoil Race Springs
8" x 2.5" x 700lbs QTY 2 - USED
8" x 2.5" x 550lbs QTY 4 - USED
8" x 2.5" x 500lbs QTY 2 - USED
8" x 2.25" x 350lbs QTY 2 - USED
7" x 2.25" x 1000lbs QTY 1 - USED
6" x 2.25" x 700lbs QTY 1 - USED
7" x 2.25" x 250lbs QTY 1 - USED
8" x 2.5" x 700lbs QTY 2 - USED
8" x 2.5" x 550lbs QTY 4 - USED
8" x 2.5" x 500lbs QTY 2 - USED
8" x 2.25" x 350lbs QTY 2 - USED
7" x 2.25" x 1000lbs QTY 1 - USED
6" x 2.25" x 700lbs QTY 1 - USED
7" x 2.25" x 250lbs QTY 1 - USED
8" x 2.5" 800lbs QTY 2 - New
8" x 2.5" 600lbs QTY 4 - New
7" x 2.25" 550lbs QTY 1 - Used
5" x 2.25" 400lbs QTY 2 - Used
4" x 2.25" 400lbs QTY 2 - New
6" x 2.25" 350lbs QTY 2 - New
5" x 2" 300lbs QTY 1 - New


Eibach Race SPrings
8" x 2.25" x 700lbs Qty 4 - USED
6" x 2.5" x 700lbs QTY 1 - USED
6" x 2.25" 1500lbs QTY 2 - Used
8" x 2.25" 660lbs QTY 2 - Used
8" x 2.25" 375lbs QTY 1 - Used
9" x 2.25" 350lbs QTY 2 - Used


H&R Race Springs
6" x 2.5" x 900lbs QTY 1 - USED
8" x 2.5" x 800lbs QTY 2 - NEW


I will have more posted later. Each spring is $40.00 + tax (9.75%) if you live in CA.

[Jonathan Lugod]

hmmm those 1000lb springs are taunting me to use up front.

[Bob Beamesderfer]

hmmm those 1000lb springs are taunting me to use up front.

Front not back? I thought the usual Civic setup was stiffen the back so the car will rotate.

[Daniel Yeung]

will 2.5" springs rattle on my 60mm perches?

[Michael Palero]

Jeff just told me they've all been sold.

[Steve Ekstrand]

@Daniel I used 2.5" on my old KW 60mm perches. They worked fine as is. But it was easy to build up the perches by wrapping some tape around the perch. I did that. And when I switched out perches I tried it without and didn't notice a difference. YMMV.

[Jeff Wong]

will 2.5" springs rattle on my 60mm perches?

daniel, ive also used 2.5" springs on my 2.25" springs, they will not rattle, just have to make sure they sit on the upper spring perch properly when you let it down. The clearance isnt as great from 60mm -> 2.5" anyways.

[Jeff Wong]

update spring list.

[Steve Ekstrand]

Will started to salivate when you listed the 6" 1500lb springs.

[Daniel Yeung]

@Daniel I used 2.5" on my old KW 60mm perches. They worked fine as is. But it was easy to build up the perches by wrapping some tape around the perch. I did that. And when I switched out perches I tried it without and didn't notice a difference. YMMV.

Thanks for the advice. I'm gonna throw 'em on my KWs!!

Jeff: can you bring the 8"x2.5"x550lbs (all four) to the next auto-x? Thanks!!

[Will Kalman]

Will started to salivate when you listed the 6" 1500lb springs.

6.7Hz FTW!

[Jeff Wong]

Will started to salivate when you listed the 6" 1500lb springs.

6.7Hz FTW!

Interesting... I only show ~3.2hz in the front... Unless this is a joke. Maybe you are talking about your escort

[KJ Christopher]

Will started to salivate when you listed the 6" 1500lb springs.

6.7Hz FTW!

Interesting... I only show ~3.2hz in the front... Unless this is a joke. Maybe you are talking about your escort

You forgot the 2.0938 multiplier.

[Steve Ekstrand]

@Jeff Its for the RX8 we're building.

[Jeff Wong]

You forgot the 2.0938 multiplier.

You do the math and let me know what you come up with

Sprung Weight = ~580lbs
Wheel Rate = ~614lb/inch

[Jonathan Lugod]

hmmmm i can use those up front! then maybe ill try no front bar

[Will Kalman]

Interesting... I only show ~3.2hz in the front... Unless this is a joke. Maybe you are talking about your escort

Yes, big improbable numbers make the joke funnier.

(And the Escort was just a shade under 3Hz in front not counting sway bar - you don't want to know the rear number, which is typically absurd in FWD applications).

[KJ Christopher]

You forgot the 2.0938 multiplier.

You do the math and let me know what you come up with

Sprung Weight = ~580lbs
Wheel Rate = ~614lb/inch

you're funny sometimes....

[Jeff Wong]

You forgot the 2.0938 multiplier.

You do the math and let me know what you come up with

Sprung Weight = ~580lbs
Wheel Rate = ~614lb/inch

you're funny sometimes....

, i honestly did not catch that until now. I was doubting myself and that I was doing it wrong, which wouldn't be a first, Huge fail, thanks for the laughs at my expense.

[Steve Collins]

Of course the frequency drops when you add damping so you'll probably want to set your shocks full soft to maximize the effect of the stiffer springs...

[Daniel Yeung]

@Daniel I used 2.5" on my old KW 60mm perches. They worked fine as is. But it was easy to build up the perches by wrapping some tape around the perch. I did that. And when I switched out perches I tried it without and didn't notice a difference. YMMV.

Thanks for the advice. I'm gonna throw 'em on my KWs!!

Jeff: can you bring the 8"x2.5"x550lbs (all four) to the next auto-x? Thanks!!

On second thought, I've decided that I'm not going to revalve my Kws, so no need to bring the springs this wknd.