Harness Bar for Nissan 350z - $200

Automotive Related, Please.

Moderators: Mike Simanyi, Anthony P.

Post Reply
codea17
Posts: 2
Joined: Thu Apr 30, 2015 6:35 pm

Harness Bar for Nissan 350z - $200

Post by codea17 »

This bar is an awesome solution to safely and securely mount harnesses in your 350z without the added weight of a full roll bar.

Designed and built by a professional mechanical engineer using CAD. Made from 1.75x0.125" D.O.M. steel tubing bent by a reputable mandrel bending shop. FEA simulations show that it can withstand at least a 40 g impact with driver and passenger weighing 200 lbs each. Total cost was around $400 for parts and bending.

Mounts at the upper stock seatbelt bolts and pre-drilled holes in the trunk designed for child safety seats. No drilling required!

Paint condition is 7/10 with a few nicks and slight discoloration where the harnesses mounted.

Located in Pasadena for pickup, or I can bring to the next event.
Attachments
350z Roll Bar Support_Loads 1.png
350z Roll Bar Support_Loads 1.png (68.27 KiB) Viewed 1416 times
350z Harness Bar von-Mises Stress 1.png
350z Harness Bar von-Mises Stress 1.png (79.44 KiB) Viewed 1416 times
IMG_4712_small.jpg
IMG_4712_small.jpg (221.17 KiB) Viewed 1416 times
Post Reply