Page 1 of 1

AEM EMS4 - Wiring Harness - Coils

Posted: Fri Dec 05, 2014 7:04 am
by Harold Hillhouse
This can be used on any 4 cylinder application

AEM Fuel Injection EMS4 #30-9605
AEM Wiring Harness 96" #30-2905-96
AEM Smart Coils (4 of them) #30-2853

All this stuff is BRAND NEW AND IN BOXES -- NEVER even mocked up -- Just opened boxes to drool -- Just what you need for that High Performance 4 cylinder application -- Boost or NA -- -- over $1600 invested -- $1400 OBO

Daddy needs new transmission parts -- make me an honest offer, this stuff has gotta go

Harold (909) 519-843six

Re: AEM EMS4 - Wiring Harness - Coils

Posted: Fri Dec 05, 2014 2:39 pm
by Bill Schenker
I'd love to get info. on your first two items, but am not finding it on AEM's website; any more info or links? is are the P/Ns correct?

Also, do you know if the Smart Coils have the same mounting dimensions as the GM LS3 coils? If so, I'd be interested in them as well!

Thanks!

Re: AEM EMS4 - Wiring Harness - Coils

Posted: Fri Dec 05, 2014 3:10 pm
by Kyle O'Rourke
Bill Schenker wrote:I'd love to get info. on your first two items, but am not finding it on AEM's website; any more info or links? is are the P/Ns correct?

Also, do you know if the Smart Coils have the same mounting dimensions as the GM LS3 coils? If so, I'd be interested in them as well!

Thanks!
EMS4:
http://www.aemelectronics.com/?q=produc ... able-ems-4

Wiring harness:
http://www.aemelectronics.com/products/ ... -harnesses

Great system. I am working on a custom build with these same components.

Re: AEM EMS4 - Wiring Harness - Coils

Posted: Fri Dec 05, 2014 4:15 pm
by KJ Christopher
Bill Schenker wrote:I'd love to get info. on your first two items, but am not finding it on AEM's website; any more info or links? is are the P/Ns correct?
This is what I'm converting to on the A mod. Toby used the system as well.

Re: AEM EMS4 - Wiring Harness - Coils

Posted: Fri Dec 05, 2014 5:54 pm
by Harold Hillhouse
I've had several people ask if I wanted to separate any of the items and the answer is no -- BUT I do have a throttle body I have used that is off a V6 GM on another project that I'll throw into the deal

Re: AEM EMS4 - Wiring Harness - Coils

Posted: Fri Dec 05, 2014 6:47 pm
by Toby Larsson
KJ Christopher wrote: This is what I'm converting to on the A mod. Toby used the system as well.
Yes, I have that same ECU and harness, I'm using coils from a Toyota 1ZZ instead of those coils. Good system that's easy to install and work with, the can bus works great running an aftermarket dash. The only thing missing is a wideband 02 sensor.

Re: AEM EMS4 - Wiring Harness - Coils

Posted: Fri Dec 05, 2014 8:21 pm
by Harold Hillhouse
This unit doesn't support 'dumb' coils which is why I bought these coils to go along with this system