Page 1 of 1

Shop that can weld stainless?

Posted: Sun Jun 29, 2014 12:00 am
by Chris Hofmann
So, I was hoping to finally make it out and run again, but discovered that every weld on my header has cracked, and the lifetime warranty doesnt cover it. Still trying to find a replacement, but wondering if anyone knows who could weld all the cracks (literally every joint on it) at a fair price.

Thanks

Re: Shop that can weld stainless?

Posted: Mon Jun 30, 2014 2:08 pm
by Bobby Beyer
Don't have an answer for you, but whoever does the work, make sure they back gas the welds otherwise you're gonna end up with some nasty sugaring.

Re: Shop that can weld stainless?

Posted: Thu Jul 17, 2014 6:54 pm
by Rick Brown
Don't know if you got an answer to this, but if not try contacting John Coffey: memberlist.php?mode=viewprofile&u=216 Email or PM, website no longer active.

Re: Shop that can weld stainless?

Posted: Fri Jul 18, 2014 12:14 am
by John Fendel
I used Ace Muffler on 1st street in Santa Ana for the stainless headers and exhaust systems on both Mustangs.
Its been a couple of years with no problems. Talk to Jose.

Re: Shop that can weld stainless?

Posted: Fri Jul 18, 2014 8:56 am
by Jayson Woodruff
Chris Hofmann wrote: weld on my header has cracked, and the lifetime warranty doesnt cover it.
What other failure modes are there for a header?!?

There's another ACE muffer here in Westminster that's done some resonably priced cat back work for me. I can't specifically attest to their header or stainless work though.

Jay W

Re: Shop that can weld stainless?

Posted: Fri Jul 18, 2014 10:15 am
by Brian Linn
Not sure if they do stainless, but they may be close to you. They did some work on my racing Miata. The owner raced Sprint cars - or Midgets, so he has racing sensitivity.

Sweeney's Custom Mufflers Inc
1617 W Sepulveda Blvd
Torrance, CA 90501

310-326-0611

Re: Shop that can weld stainless?

Posted: Fri Jul 18, 2014 5:30 pm
by Bobby Beyer
Jayson Woodruff wrote:
Chris Hofmann wrote: weld on my header has cracked, and the lifetime warranty doesnt cover it.
What other failure modes are there for a header?!?

Jay W

$hitty design aka 90% of Miata headers.

Re: Shop that can weld stainless?

Posted: Sat Jul 19, 2014 8:00 am
by Steve Coe
try here

http://coastfab.com/
Coast Fabrication, Inc.
16761 Burke Lane
Huntington Beach, CA 92647
Phone: (714) 842-2603
Fax: (714) 847-1824
info@coastfab.com

or

http://www.burnsstainless.com/
Burns Stainless
1013 W. 18th St.
Costa Mesa, Ca 92627
(949) 631-5120
Fax (949) 631-3184

Re: Shop that can weld stainless?

Posted: Mon Jul 21, 2014 7:30 pm
by Kurt Rahn
Rick Brown wrote:Don't know if you got an answer to this, but if not try contacting John Coffey: memberlist.php?mode=viewprofile&u=216 Email or PM, website no longer active.
+1. He did my exhaust and did a great job!

Re: Shop that can weld stainless?

Posted: Mon Aug 04, 2014 10:32 am
by Chris Hofmann
Cool. Thanks for the replies. I will have to hit some of these places up this week, want to get this exhaust fixed so I can try and sell it.