Looking for course set up help 8/18 3pm
Moderators: Mike Simanyi, Christine Grice, Rick Brown
- Stephen Yeoh
- Solo Chair
- Posts: 651
- Joined: Thu May 15, 2008 11:30 am
- Club: CASOC
- Car#: 88
- Contact:
Looking for course set up help 8/18 3pm
Hi everyone,
I'm looking for 2 workers for course set up help on Friday 8/18 @ 3pm and 2 workers for course change over on Saturday. Friday set up counts as your Saturday work, and Saturday change over counts as your Sunday work.
Please reply here.
Thanks! Stephen
I'm looking for 2 workers for course set up help on Friday 8/18 @ 3pm and 2 workers for course change over on Saturday. Friday set up counts as your Saturday work, and Saturday change over counts as your Sunday work.
Please reply here.
Thanks! Stephen
Last edited by Stephen Yeoh on Thu Aug 10, 2017 11:12 pm, edited 2 times in total.
Stephen Yeoh
Cal Club Autocross Chair
Cal Club Autocross Chair
- Ed T
- Current Solo Director
- Posts: 472
- Joined: Thu Nov 03, 2016 12:16 am
- Club: SCNAX
- Car#: 711
- Contact:
Re: Looking for course set up help 8/18 3pm
I can do the Saturday changeover
ES #711 Aston Martin V8 MR2 Spyder Vantage
-
- Executive Board Member
- Posts: 36
- Joined: Thu Jun 30, 2016 5:43 pm
Re: Looking for course set up help 8/18 3pm
I can help on Saturday afternoon.
Dennis Hubbard
ES 471
Dennis Hubbard
ES 471
- Pete Loney
- Posts: 1083
- Joined: Thu May 15, 2008 11:26 am
- Club: SCNAX
- Car#: 777
- Location: Torrance
Re: Looking for course set up help 8/18 3pm
I have time on Friday for setup help.Stephen Yeoh wrote:Hi everyone,
I'm looking for 2 workers for course set up help on Friday 8/18 @ 3pm and 2 workers for course change over on Saturday. Friday set up counts as your Saturday work, and Saturday change over counts as your Sunday work.
Please reply here.
Thanks! Stephen
2021 Season: 777 ES | 1999 Miata, 10th Anniversary #3987/7500
MIATAROADSTER.COM
MIATAROADSTER.COM
- Reed Gibson
- Current CSCC Overall Champion
- Posts: 502
- Joined: Mon Mar 23, 2015 12:33 pm
- Club: SCNAX
Re: Looking for course set up help 8/18 3pm
I can come down and help Friday Stephen
- Chad-1stGen
- Posts: 120
- Joined: Tue Dec 23, 2014 12:08 pm
- Club: CASOC
- Car#: 268
- Contact:
Re: Looking for course set up help 8/18 3pm
Looks like it might be covered but I can help with setup Friday.
- Stephen Yeoh
- Solo Chair
- Posts: 651
- Joined: Thu May 15, 2008 11:30 am
- Club: CASOC
- Car#: 88
- Contact:
Re: Looking for course set up help 8/18 3pm
Reed, Pete and Chad will be the course set up workers on Friday. This will count as your Saturday work assignment. See you at 3.
Dennis and Ed will have Sat changeover, and it counts as your Sunday work.
Thank you!
Dennis and Ed will have Sat changeover, and it counts as your Sunday work.
Thank you!
Stephen Yeoh
Cal Club Autocross Chair
Cal Club Autocross Chair
- Stephen Yeoh
- Solo Chair
- Posts: 651
- Joined: Thu May 15, 2008 11:30 am
- Club: CASOC
- Car#: 88
- Contact:
Re: Looking for course set up help 8/18 3pm
Reed, Pete and Chad - Course set up time is now in the air. AMCI needs the runway. Waiting for availability. Chad, please send me your cell phone (direct message or post here). I'll let you know what time we can set up.
Worst case, we'll have to do course set up on Saturday morning.
Worst case, we'll have to do course set up on Saturday morning.
Stephen Yeoh
Cal Club Autocross Chair
Cal Club Autocross Chair
- Pete Loney
- Posts: 1083
- Joined: Thu May 15, 2008 11:26 am
- Club: SCNAX
- Car#: 777
- Location: Torrance
Re: Looking for course set up help 8/18 3pm
Acknowledged and Booooo........Stephen Yeoh wrote:Reed, Pete and Chad - Course set up time is now in the air. AMCI needs the runway. Waiting for availability. Chad, please send me your cell phone (direct message or post here). I'll let you know what time we can set up.
Worst case, we'll have to do course set up on Saturday morning.
2021 Season: 777 ES | 1999 Miata, 10th Anniversary #3987/7500
MIATAROADSTER.COM
MIATAROADSTER.COM
- Reed Gibson
- Current CSCC Overall Champion
- Posts: 502
- Joined: Mon Mar 23, 2015 12:33 pm
- Club: SCNAX
Re: Looking for course set up help 8/18 3pm
We'll find a way to make it work!
- Stephen Yeoh
- Solo Chair
- Posts: 651
- Joined: Thu May 15, 2008 11:30 am
- Club: CASOC
- Car#: 88
- Contact:
Re: Looking for course set up help 8/18 3pm
Sorry guys, it's been confirmed. Course set up will be Saturday morning @ 6am. Gates will be open by then.
Stephen Yeoh
Cal Club Autocross Chair
Cal Club Autocross Chair
- Randy Gonzalez
- Current Solo Director
- Posts: 709
- Joined: Sun May 26, 2013 8:12 pm
- Club: CASOC
- Car#: 436
- Location: Orange County, CA
- Contact:
Re: Looking for course set up help 8/18 3pm
OK guys, here's the new best way to get in (and still have your car clean!). We'll have the gate open at 6:00 am (or call me if anybody wants to get there earlier). If you go this way, you'll avoid the giant gravel trap that we've been driving through for the past few months. Note: the Astor entrance is still open and our old taxiway intersection by all the palm trees is still open and available.
Basic instructions: From Sand Canyon enter the Great Park on Marine Way (just like last year). Continue straight on the new Marine Way (it's a public road now with curbs, bike lanes, center island and stop lights). There is a stop light intersection with a brand new Skyhawk street (curbs, bike lane, etc.). Turn left there (only way you can turn). The entrance gate to our area is on the right about 1000 feet up. We'll have the gate open by 6:00am.
http://autocrossnews.com/neweltoromap.png
Basic instructions: From Sand Canyon enter the Great Park on Marine Way (just like last year). Continue straight on the new Marine Way (it's a public road now with curbs, bike lanes, center island and stop lights). There is a stop light intersection with a brand new Skyhawk street (curbs, bike lane, etc.). Turn left there (only way you can turn). The entrance gate to our area is on the right about 1000 feet up. We'll have the gate open by 6:00am.
http://autocrossnews.com/neweltoromap.png
SCCA Certifications: Solo Safety Steward, Flagging and Communications
http://CorvetteNews.com/
http://CorvetteNews.com/
- Rick Brown
- Current Solo Director
- Posts: 5117
- Joined: Thu May 15, 2008 11:25 am
- Club: PSCC
- Car#: 240
- Location: Lake Elsinore, CA
Re: Looking for course set up help 8/18 3pm
Have you email blasted the Saturday and Sunday entrants from MSR?
Since light is faster than sound...many people look bright until they speak...
- Randy Gonzalez
- Current Solo Director
- Posts: 709
- Joined: Sun May 26, 2013 8:12 pm
- Club: CASOC
- Car#: 436
- Location: Orange County, CA
- Contact:
Re: Looking for course set up help 8/18 3pm
Well....I didn't want to add that complication, but if somebody wants to do it they can.
This is the new proper way to get to our site. They did a lot of cleanup for some Great Park event, so now it's nice new public roads till that gate off of Skyhawk and that taxi way is cleaned up as well. This entrance totally avoids the massive gravel trap mess.
They also cleaned up all the weeds and grass growing through the pavement in our lower grid area. In general, they did quite a bit of cleanup in the areas we use as far as weeds and overgrowth goes. Opened up the grid area quite a bit and the road that I paddocked on last event up there is much wider now that it's cleaned up....plenty of space for parking/paddock on it as well.
No setup today, but we'll be there at 6 tomorrow! If anybody wants to start earlier, let me know and I'll work with Ken to get the gate open earlier!
This is the new proper way to get to our site. They did a lot of cleanup for some Great Park event, so now it's nice new public roads till that gate off of Skyhawk and that taxi way is cleaned up as well. This entrance totally avoids the massive gravel trap mess.
They also cleaned up all the weeds and grass growing through the pavement in our lower grid area. In general, they did quite a bit of cleanup in the areas we use as far as weeds and overgrowth goes. Opened up the grid area quite a bit and the road that I paddocked on last event up there is much wider now that it's cleaned up....plenty of space for parking/paddock on it as well.
No setup today, but we'll be there at 6 tomorrow! If anybody wants to start earlier, let me know and I'll work with Ken to get the gate open earlier!
SCCA Certifications: Solo Safety Steward, Flagging and Communications
http://CorvetteNews.com/
http://CorvetteNews.com/
- Chad-1stGen
- Posts: 120
- Joined: Tue Dec 23, 2014 12:08 pm
- Club: CASOC
- Car#: 268
- Contact:
Re: Looking for course set up help 8/18 3pm
I'm excited about the new route! Thanks for sharing that.
-
- Posts: 25
- Joined: Mon Nov 28, 2016 10:57 am
- Club: CASOC
- Car#: 274
Re: Looking for course set up help 8/18 3pm
I'll be there at 6 to lend a hand
-
- Posts: 24
- Joined: Wed Apr 26, 2017 11:45 am
Re: Looking for course set up help 8/18 3pm
I can get there as early as need be for preparation as I live local, just let me know what time to get there.