In my case.....a Mazda MX5 ND.
•A rear spoiler or a rear wing may be added, removed, or modified but must not extend past the perimeter of the original body (excluding non-integral bumpers). Endplates are allowed; size is not restricted. A rear spoiler may extend 10.0” (254 mm) maximum from the original body. A rear wing, components, and attachment points must be behind the centerline of the rear axle and may extend 6.0” maximum above the topmost portion of the roofline (or windshield frame for a convertible).
Question...... Is the (wing) "must not extend past the perimeter of the original body".....designated by the position on where it is mounted above the car? Meaning, since the rear of the vehicle tapers off dramatically.....that the wing can only be as wide as the area "below" where the wing is mounted to, or it can be as wide as the maximum width of the vehicle (the rear wheels/fenders area)?
Believe I'll have other questions too......Thanks
![Cool 8-)](./images/smilies/icon_cool.gif)