Does anyone have a local source for Alumalite or Alumicor?
Moderator: Mike Simanyi
- Mike Simanyi
- Former Club Chair
- Posts: 2460
- Joined: Thu May 15, 2008 11:26 am
- Club: No$
- Car#: 6
Does anyone have a local source for Alumalite or Alumicor?
I need to rebuild my splitter and spent a couple hours yesterday trying to track down Alumalite or Alumicor sheets, without luck.
Does anyone know of a local vendor who sells the stuff?
Thanks,
Mike
Does anyone know of a local vendor who sells the stuff?
Thanks,
Mike
- Robert Puertas
- Posts: 1093
- Joined: Thu May 15, 2008 11:26 am
- Club: PSCC
- Car#: 44
Re: Does anyone have a local source for Alumalite or Alumicor?
http://www.sign-mart.com/products/8/82/index.aspx" onclick="window.open(this.href);return false;
They're in Orange.
They're in Orange.
- Mike Simanyi
- Former Club Chair
- Posts: 2460
- Joined: Thu May 15, 2008 11:26 am
- Club: No$
- Car#: 6
Re: Does anyone have a local source for Alumalite or Alumicor?
Thanks Robert, they have what I'm looking for and I just picked up a sheet of it.
Mike
Mike
- Robert Puertas
- Posts: 1093
- Joined: Thu May 15, 2008 11:26 am
- Club: PSCC
- Car#: 44
Re: Does anyone have a local source for Alumalite or Alumicor?
No problem!
5 minutes on Google.
5 minutes on Google.
-
- Posts: 2663
- Joined: Wed May 14, 2008 4:22 pm
- Club: CASOC
- Car#: 32
- Location: HB, CA
Re: Does anyone have a local source for Alumalite or Alumicor?
Robert Puertas wrote:No problem!
5 minutes on Google.
-
- Former CSCC Overall Champion
- Posts: 1681
- Joined: Thu May 15, 2008 11:26 am
- Club: SCNAX
- Car#: 14
- Location: Corona del Mar
- Contact:
Re: Does anyone have a local source for Alumalite or Alumicor?
How much?Mike Simanyi wrote:Thanks Robert, they have what I'm looking for and I just picked up a sheet of it.
Mike
MiataRoadster/OS Giken/ChaseCam/
2001 Mazda Miata
#14 DP
2001 Mazda Miata
#14 DP
- Toby Larsson
- Former CSCC Overall Champion
- Posts: 314
- Joined: Thu May 15, 2008 11:26 am
- Club: PSCC
- Location: @4000ft.
- Contact:
Re: Does anyone have a local source for Alumalite or Alumicor?
Think you can get a better deal?Bill Schenker wrote:How much?Mike Simanyi wrote:Thanks Robert, they have what I'm looking for and I just picked up a sheet of it.
Mike
http://www.elitetint.com" onclick="window.open(this.href);return false; http://www.osgiken.net" onclick="window.open(this.href);return false;
-
- Former CSCC Overall Champion
- Posts: 1681
- Joined: Thu May 15, 2008 11:26 am
- Club: SCNAX
- Car#: 14
- Location: Corona del Mar
- Contact:
Re: Does anyone have a local source for Alumalite or Alumicor?
Lol! For the future: splitter number 4!Toby Larsson wrote:Think you can get a better deal?Bill Schenker wrote:How much?Mike Simanyi wrote:Thanks Robert, they have what I'm looking for and I just picked up a sheet of it.
Mike
MiataRoadster/OS Giken/ChaseCam/
2001 Mazda Miata
#14 DP
2001 Mazda Miata
#14 DP
- Richard Jung
- Posts: 448
- Joined: Thu May 15, 2008 11:24 am
- Club: PSCC
- Car#: 71
- Location: Irvine, CA
- Contact:
Re: Does anyone have a local source for Alumalite or Alumicor?
I envy you guys.
Anyone know someone on the SEB to talk to?
Anyone know someone on the SEB to talk to?
- Mako Koiwai
- Posts: 6490
- Joined: Thu May 15, 2008 11:25 am
- Club: SCNAX
- Car#: 34
- Location: South Pasadena, CA
- Contact:
Re: Does anyone have a local source for Alumalite or Alumicor?
Forget it ... aren't they going to Take Away from STU, ie. wings
-
- Posts: 3376
- Joined: Thu May 15, 2008 11:26 am
- Club: PSCC
- Location: Orange
- Contact:
Re: Does anyone have a local source for Alumalite or Alumicor?
If a certain former SEB member's comments a couple of years ago are any indication he'd ban wings/spoilers/splitters.Mako Koiwai wrote:Forget it ... aren't they going to Take Away from STU, ie. wings
- Richard Jung
- Posts: 448
- Joined: Thu May 15, 2008 11:24 am
- Club: PSCC
- Car#: 71
- Location: Irvine, CA
- Contact:
Re: Does anyone have a local source for Alumalite or Alumicor?
Would that be the same "he who shall not be named " person who is on the STAC now?Bob Beamesderfer wrote:If a certain former SEB member's comments a couple of years ago are any indication he'd ban wings/spoilers/splitters.Mako Koiwai wrote:Forget it ... aren't they going to Take Away from STU, ie. wings
-
- Posts: 3376
- Joined: Thu May 15, 2008 11:26 am
- Club: PSCC
- Location: Orange
- Contact:
Re: Does anyone have a local source for Alumalite or Alumicor?
[Magic 8 Ball] All signs point to Yes [/Magic 8 Ball]Richard Jung wrote:Would that be the same "he who shall not be named " person who is on the STAC now?Bob Beamesderfer wrote:If a certain former SEB member's comments a couple of years ago are any indication he'd ban wings/spoilers/splitters.Mako Koiwai wrote:Forget it ... aren't they going to Take Away from STU, ie. wings
-
- Posts: 264
- Joined: Thu May 15, 2008 11:26 am
- Club: PSCC
- Car#: 908
- Location: Redondo Beach, CA
Re: Does anyone have a local source for Alumalite or Alumicor?
Richard Jung wrote:"he who shall not be named "
Voldemort?
Sorry... I really don't know.
- Mike Simanyi
- Former Club Chair
- Posts: 2460
- Joined: Thu May 15, 2008 11:26 am
- Club: No$
- Car#: 6
Re: Does anyone have a local source for Alumalite or Alumicor?
Retail price - as of yesterday - was $135.79 + tax for white. It was about $175 for black. I can buy a lot of Bumper Black spray cans for $40+.
They list it as 6mm but it doesn't look like it's anywhere near that thick. It may be 4mm - I'll have to measure it.
Mike
They list it as 6mm but it doesn't look like it's anywhere near that thick. It may be 4mm - I'll have to measure it.
Mike
- Q V
- Solo Safety Steward
- Posts: 1398
- Joined: Thu May 15, 2008 11:26 am
- Club: SCNAX
- Car#: 69
- Location: Orange County, CA
Re: Does anyone have a local source for Alumalite or Alumicor?
At first, I thought the alumalite was in orange and was like , but then I realized it's the shop that is in Orange, then I was like .Robert Puertas wrote:They're in Orange.
But looks like they have regular aluminum & corrugated plastics in orange, :gpower:
- Chris Teague
- Posts: 82
- Joined: Thu May 15, 2008 11:25 am
- Club: GRA
- Car#: 60
- Location: San Diego, CA
Re: Does anyone have a local source for Alumalite or Alumicor?
Maybe you need to add water?Mike Simanyi wrote:Retail price - as of yesterday - was $135.79 + tax for white. It was about $175 for black. I can buy a lot of Bumper Black spray cans for $40+.
They list it as 6mm but it doesn't look like it's anywhere near that thick. It may be 4mm - I'll have to measure it.
Mike
- Craig Naylor
- Posts: 1973
- Joined: Thu May 15, 2008 11:30 am
- Club: SCNAX
- Car#: 80
- Location: Long Beach
Re: Does anyone have a local source for Alumalite or Alumicor?
No. They probably just use the same measuring tape the lumber industry uses where a 2x4 in the 50s and prior was was 2" x 4", but is now 1 1/2" x 3 1/2"Chris Teague wrote:Maybe you need to add water?Mike Simanyi wrote:They list it as 6mm but it doesn't look like it's anywhere near that thick. It may be 4mm - I'll have to measure it.