Cal Club Autocross Forums

hello, i have a 05 nissan 350z with some mods. Aftermarket clutch and flywheel solid and polyurethane bushings on front lower arm. adjustable coilover adjustable endlinks adjustable swaybars harness bar plenum spacer Air intake Front lip which class would my car fall under? CSP? thank you Is your a...

Bushings cant contain more metal than stock, so poly or delrin is fine, but all metal is not. I believe Super Street Modified is the next step in the ladder (350z is 2 seater right?), but your car and prep level would probably be more competitive in BSP. 350z is 2 seater. i signed up for CSP for th...

Kris: I believe BSP is the correct class. Edit: Not sure on the "Solid" bushings, what are they? oh.. i thought clutch, lightweight flywheel, and polyurethane/solid bushings would bump me up a class from BSP. i have solid bushings for the compression arm.http://www.splparts.com/chassis-Z3...

hello, i have a 05 nissan 350z with some mods.
Aftermarket clutch and flywheel
solid and polyurethane bushings on front lower arm.
adjustable coilover
adjustable endlinks
adjustable swaybars
harness bar
plenum spacer
Air intake
Front lip

which class would my car fall under? CSP?
thank you

Arthur Grant wrote:Kris, you going to come out and run with us at all the remainder of the year?

I'll try. if. the events are held in irvine then most likely I'll go.
if it ok to run without the front bumper in 'normal' groups, points?
my car slammed now for drift look haha

i fixed the stripped hole using a heli coil.. well in kind of a ghetto way. lol
thanks for help guys

Im at MDi hardware. they have everything!
I got all the help I need from a person who works here. very friendly.
I bought heli coil kit to keep the same size of the bolt

now it's a matter of if I do it right or not!!:)

where can I purchase m7x1.0 (around 20mm length). and m8x1.0 in coarse thread or 1.25. preferably near irvine

I need the bolt head to be like 8mm socket size..in order to clear the pan

A Helicoil uses an STI thread. This is different than anything that'll be in that set. The correct tap, and maybe drill (It's been a while) should be in the Helicoil set when and if you buy one. However, the HF tap and die set would be fine if the thread just needs chasing. How did this happen? Did...

oh my bad. I checked the size. it's m6x1.0. 20mm.

you are correct, mark. it's the aluminum bolt hole in the car. i realized that i'll most likely HAVE to use the heil coil to keep the same bolt size because bigger than this bolt head may interfere with the pan itself. i heard the size is 10x1.25 but i'll DD check later. This is kind of scary to wor...

Mako to wrote:Do "we" have the money to employee some Cal Poly students to help work the event /course?

are only cal poly students allowed for this "part time" job thing?

does anyone by any chance know how to tap a bolt hole for the oil pan? (the bolts that hold the pan). if so, could you give me tips on doing this? i'm not 100% sure but the size is around 10x1.25
I stripped one of the bolts, and there's a small oil leak.
i never tapped a bolt hole before..
thanks.

i recently new bought HJC AR10 ii helmet.
Does anyone want to trade my clear face shield (still has new stickers on) with your blue chrome face shield?
Or i can sell mine for $65.

price dropped

dang.. they do have camber wear. and not so much tread left for DD.
i have to back out on this one.

hmm..
can you take some pics of the tread life using a penny? camber wear? any plugs?

can you do $20 for a pair?

i have a Wil-260-10371 5/8 bore brake master cylinder kit for sale. I bought it on may 10th. i only bled the brake system once with this installed. Never actually used it. The hose has been cut in half. and the push rod thing has been cut little, about .5" or less. Original packaging, instructi...

I'm looking for some super cheap rims, or with tires for drift spares. 17x8 or wider. Under +35 offset. 5x114.3 bolt pattern.
OR a pair of 18x8.5 or wider works too.
thanks!

Sorry Kris - I've had some stuff develop that's taking up too much of my time. Maybe some other time. Mike no problem. Do you have a welding machine by any chance? preferably TIG i need some little dabs of welds on my toe arm. The long stud that screws into the rod is slightly broken off from the e...

the OP has been edited for help. didn't want to make another thread. :mrt:

Kris, Are you in Orange County? I have a SmartCamber gauge and long level. I also have vinyl floor tiles you can use to easily create a level pad for your car, and I'll be working on alignment and suspension at my house tomorrow night and Friday night, if you want to stop by. Mike i live in Irvine....

Warren Leach wrote:I have one Kris. But I am not close.


nalbar

i know you have it but too far to go there lol
I got my alignment done at Clark's with bad experience. One of couple of things is that the steering is not even close to straight.

i'll just wait for someone to chime in w the reader.

OFF TOPIC: Do you know where i can find the rule book? i'd like to know if vented carbon hood kicks me out of BSP. vented hood won't make me go faster lol