Page 1 of 1

Willing To.. Get Help.. for the Miata

Posted: Sun Mar 14, 2010 7:32 pm
by Tito Sar
Does anyone have a 3/4'' drill bit with drill to get drilling on holes needed for my ABS sensor wiring harnesses. Apparently Hard Dog caught me unexpected! I wish I can buy the stuff but it is way out of my budget by now since I've tried everything including hole saws to no avail. :cry:

Re: Willing To.. Get Help.. for the Miata

Posted: Mon Mar 15, 2010 12:50 pm
by Dan Shaw
His may sound silly but try hunting down a machine shop. Usually they will charge you a small feeto do a job like that on a press. Or if you're doing it yourself then I would be sure to use good cutting fluid and be patient. What are you drilling through and why 3/4?

Re: Willing To.. Get Help.. for the Miata

Posted: Mon Mar 15, 2010 2:27 pm
by Will Kalman
What about the 3/4" hole saw? Couldn't find one or found one and is didn't do the job?

3/4" hole saw at Home Depot:

http://www.homedepot.com/h_d1/N-5yc1vZ1 ... ogId=10053" onclick="window.open(this.href);return false;

Image

Re: Willing To.. Get Help.. for the Miata

Posted: Mon Mar 15, 2010 8:07 pm
by Philip Strong
Get a step drill from Harbor Freight - cheap and quick.

http://search.harborfreight.com/cpisear ... step+drill" onclick="window.open(this.href);return false;