Cal Club Autocross Forums

I have an assorted set of reusable vinyl numbers, and given that the Coxster is made of steel everywhere, I can use magnetic numbers.

My idea is to place the reusable vinyl numbers on a white (or black) magnetic sheet and then cut the number, so I will have magnetic numbers instead.

Thanks

Not walk-in but you can get it pretty quick.

I use this... http://www.mcmaster.com/#5756k35" onclick="window.open(this.href);return false; item# 5756K35

Other than that, I know Michaels sells sheets, but they didn't work very well.

http://www.mclogan.com/shop/contact_us.php" onclick="window.open(this.href);return false;

Rick Brown wrote:http://www.mclogan.com/shop/contact_us.php

Hey thanks, didn't know this place was so close to us!

Great info. Thanks a lot !!!

We used Kinko's once to buy mag material at the last moment ... it was a bit expensive

Nicole Nagler wrote:Not walk-in but you can get it pretty quick.

I use this... http://www.mcmaster.com/#5756k35" onclick="window.open(this.href);return false; item# 5756K35

Not walk in... says who?

I pick my magnetic sheeting up at will call in Santa Fe Springs. From 1st hand experience, order SEVERAL hours in advance, or expect to wait 2 hours on site. Limited employees can pull and pack the product as it's a "hazardous material". You will also have to sign a release that you will not take it, or ship it, on board an airplane due to it's "hazardous material" designation.