Page 1 of 1
WTB: Mopar
Posted: Thu Jun 10, 2010 8:03 am
by Chad Stubblefield
this might be a stretch
I know there are some classic mopar folks around here.
Looking for some mopar steel wheels 14"x5.5 or 6 ,
Large bolt pattern 5x4.5,
need to accept the dog dish hub caps that I have.
Black. or if they need painting or powder coating thats fine.
looking spend around $25 a wheel for used ones.
let me know what yougot.

Re: WTB: Mopar
Posted: Thu Jun 10, 2010 8:10 am
by Steve Ekstrand
I have a couple of small bolt pattern, no large.
What are these going on?
You want four?
I'll ask Steve Wall the CPW prez, I know he saw my parts stash and went... "Don't throw those small pattern 14's away, they get $20 a piece at the Spring Fling swap!"
Re: WTB: Mopar
Posted: Thu Jun 10, 2010 8:17 am
by Chad Stubblefield
thanks Steve
going onto my 73 Duster 340
(4)
thanks for the help
Re: WTB: Mopar
Posted: Thu Jun 10, 2010 9:56 am
by Steve Coe
try The Wheel Smith in Santa Ana
(714) 556-3861
Re: WTB: Mopar
Posted: Thu Jun 10, 2010 10:13 am
by KJ Christopher
Chad Stubblefield wrote:thanks Steve
going onto my 73 Duster 340
(4)
thanks for the help
The 16x7 and 16x8 I had on my barracuda would look great on that car.

- DSCN3342 (Medium).JPG (73.3 KiB) Viewed 9580 times

- DSCN3343 (Medium).JPG (84.04 KiB) Viewed 9580 times
Re: WTB: Mopar
Posted: Thu Jun 10, 2010 12:00 pm
by Steve Ekstrand
Stockton Wheel and some others make the stock steelies that will fit dog dishes in 16 and 17. Gives you much better tire options. 14's!!! Yikes.
Re: WTB: Mopar
Posted: Thu Jun 10, 2010 2:03 pm
by Chad Stubblefield
since the duster is stock and numbers matching, I might as well do the stock 14's.
Then the E70-14 tires. Or the pep boys Futura ($60) if all else fails.
Re: WTB: Mopar
Posted: Thu Jun 10, 2010 4:09 pm
by Steve Ekstrand
Stock! What's the fun in that..... ;)
Here is "stock".

Re: WTB: Mopar
Posted: Thu Jun 10, 2010 9:05 pm
by Chuck Fowler
pick a part for some 15" cop car wheels. cheep and fit like a dream.

Re: WTB: Mopar
Posted: Fri Jun 11, 2010 9:36 am
by Chad Stubblefield
do those pick a part's have older mopars?
found some rallyes with tires for $500
but I like the steelies with dog dishes
Re: WTB: Mopar
Posted: Mon Jun 14, 2010 7:15 am
by Chuck Fowler
Chad Stubblefield wrote:do those pick a part's have older mopars?
found some rallyes with tires for $500
but I like the steelies with dog dishes
they did every time i've been. the cop car wheels were used into the 80's so they tend to be easyer to find. also you can wait ubtil FallFling and probably find some. forget the Rally wheels, cop car stuff looks much better

Re: WTB: Mopar
Posted: Mon Jun 14, 2010 7:33 am
by Chad Stubblefield
not crazy about the cop wheels
I like that solid look from the steelies.
I did buy some rallyes with centers, rings and tires that need to be repainted. Paid too much
But I have free access to sand blasting and a tire mounter back home so thats going to save moneys.
still looking for some steelies though.
thanks
Re: WTB: Mopar
Posted: Mon Jun 14, 2010 9:44 am
by Steve Ekstrand
My friend is going to check with another friend.
He says they aren't hard to get at any of the show/swaps. And about $25/per. But Fall Fling is four months away.