Cal Club Autocross Forums

ONE MORE NEEDED STILL!

------------------------------------------------------------------------------
Some experience preferred.

Course Setup workers Needed on 2-8-14, a Saturday.

We will need to meet as early as possible. I will be around at 6 AM on Sat.

I need 5 workers who will get work credit for the weekend.

And , this will guarantee you to get in the practice if you are not already.

Sat. change over help is required as well after runs are done on Sat.

Let me know....


-----------------------
The List:

1. Tom T.
2. Ed Holley
3. Matt Ales
4. Byron Goodman
5. Silvio Zucchet

Correction.

Friday is not an option due to the lot not being available until 5 PM.

I will need 5 Workers for the crack of Dawn on Saturday.
This will be your work assignment for the weekend.

PLEASE contact me soon so I can start coordinating who is going to be doing what.

We will have to be really efficent to make the 8:30 start time.

Pete....

I'll help, since I'm in the practice I'll be there already. It'll be just like the old days.....
One thought: you'll most likely be fine tuning the course as cars are running to keep things on time so if we get the basics done by 830 we'll be in good shape.

Pete Loney wrote:Correction.

Friday is not an option due to the lot not being available until 5 PM.

I will need 5 Workers for the crack of Dawn on Saturday.
This will be your work assignment for the weekend.

PLEASE contact me soon so I can start coordinating who is going to be doing what.

We will have to be really efficent to make the 8:30 start time.

Pete....

I'll do it. I'll be there no later than 6:00 a.m. I don't have one, but someone needs to have a pick-up truck available to quickly place large amounts of cones for further dispersal. Unless you have a different plan.

Pete Loney wrote: ...a thousand cones...

Uh, maybe rethink your course design to include about 700 fewer cones?

Rick Brown wrote:

Pete Loney wrote: ...a thousand cones...

Uh, maybe rethink your course design to include about 700 fewer cones?

How 'bout a barrel-racing kind of AX course...just TWO cones.

Ed Holley wrote:How 'bout a barrel-racing kind of AX course...just TWO cones.

People whine to much when there's a single pin cone... use 4 in a box shape touching one another, then it's not a pin cone!

Ed Holley wrote:

Pete Loney wrote:Correction.

Friday is not an option due to the lot not being available until 5 PM.

I will need 5 Workers for the crack of Dawn on Saturday.
This will be your work assignment for the weekend.

PLEASE contact me soon so I can start coordinating who is going to be doing what.

We will have to be really efficent to make the 8:30 start time.

Pete....

I'll do it. I'll be there no later than 6:00 a.m. I don't have one, but someone needs to have a pick-up truck available to quickly place large amounts of cones for further dispersal. Unless you have a different plan.

Thanks Ed. You are on the list now.

Rick Brown wrote:

Pete Loney wrote: ...a thousand cones...

Uh, maybe rethink your course design to include about 700 fewer cones?

I was exagerting for dramatic effect rick

Although, if you add up grid, plus safety, plus course, it feels like a thousand.....

Pete Loney wrote:

Rick Brown wrote:

Pete Loney wrote: ...a thousand cones...

Uh, maybe rethink your course design to include about 700 fewer cones?

I was exagerting for dramatic effect rick

Although, if you add up grid, plus safety, plus course, it feels like a thousand.....

Oh, I knew you were.

But if you have a basic concept you could send me, I'd like to see it for motorhome and speaker placement. I'll plan on being there earlier than usual to get that part setup.

Rick,

I am blending ideas from past designs still. I will send you the basics by Sat. night.

I'll help out both morning and night. I plan to be there all day Saturday as well. If this counts for work that means I get to take more rides!!!

Matt Ales wrote:I'll help out both morning and night. I plan to be there all day Saturday as well. If this counts for work that means I get to take more rides!!!

Thanks Matt.

Only One more spot left.

Thanks guys for stepping up so far!!

Hello,
I can come in and help I've never done setup before but I have done the opposite at the end of an event.
I can run pretty well and I can be there at 6 Or earlier.
Let me know if this helps

silvio zucchet wrote:Hello,
I can come in and help I've never done setup before but I have done the opposite at the end of an event.
I can run pretty well and I can be there at 6 Or earlier.
Let me know if this helps

You're in!

Thanks


We are now Full, thanks folks

CTV is currently at my house. I'll plan to bring it to speedway @ 6am Saturday. If work sends that plan out the window I'll let you know as early as possible.

Eric Clements wrote:CTV is currently at my house. I'll plan to bring it to speedway @ 6am Saturday. If work sends that plan out the window I'll let you know as early as possible.

In an email, Pete had said he hoped to do some initial setup Friday as soon as he could get access. I know the trailer is still at the speedway, but probably not keys.

Rick Brown wrote:

Eric Clements wrote:CTV is currently at my house. I'll plan to bring it to speedway @ 6am Saturday. If work sends that plan out the window I'll let you know as early as possible.

In an email, Pete had said he hoped to do some initial setup Friday as soon as he could get access. I know the trailer is still at the speedway, but probably not keys.

Uhhhhh... I have plans of being in Fontana around 3:30 Friday in case the
Lot opens early, Kj is doing the same.

Can the work be done after the event please.

I already booked a hotel for friday night too.

AAA Speedway is allowing us to setup today now.

KJ and I will be on site around 3:30 ish.

Byron, or Matt or Tom or Silviio or Ed H. can anyone of you make it then?

This will take some stress off tomorrow morning for sure.

BTW, it looks like the CTV won't be there until 6 AM Saturday. But the cone trailer is there.

Luckily KJ has two choices of unlocking the cone trailer.

Call me.

Pete...

Pete, let me know if you can use some help because I maybe able to slip out early from work and meet you there at 3:30ish. And if yes can this count as my work? Thanks 909-831-1575

Pete Loney wrote:AAA Speedway is allowing us to setup today now.

KJ and I will be on site around 3:30 ish.

Byron, or Matt or Tom or Silviio or Ed H. can anyone of you make it then?

This will take some stress off tomorrow morning for sure.

BTW, it looks like the CTV won't be there until 6 AM Saturday. But the cone trailer is there.

Luckily KJ has two choices of unlocking the cone trailer.

Call me.

Pete...

I got your PM and only just now responded. I'm still at work until 5:00 but I'll be there at 6:00 in the morning.

Ed Holley wrote:

Pete Loney wrote:AAA Speedway is allowing us to setup today now.

KJ and I will be on site around 3:30 ish.

Byron, or Matt or Tom or Silviio or Ed H. can anyone of you make it then?

This will take some stress off tomorrow morning for sure.

BTW, it looks like the CTV won't be there until 6 AM Saturday. But the cone trailer is there.

Luckily KJ has two choices of unlocking the cone trailer.

Call me.

Pete...

I got your PM and only just now responded. I'm still at work until 5:00 but I'll be there at 6:00 in the morning.

same here, I dint get off work till 6 and im in santa monica. Ill see you guys at 6 tomorrow.