Wanted: 13" wheel for test fit

General discussions about Solo

Moderator: Mike Simanyi

Post Reply
User avatar
Jason Isley BS RX8
Posts: 1129
Joined: Thu May 15, 2008 11:26 am
Car#: 0
Location: Coto de Caza
Contact:

Wanted: 13" wheel for test fit

Post by Jason Isley BS RX8 »

Anyone have a 13" wheel (4-100) we could use for a test fit? We just need to see if it clears the brakes. Width and offset not really important for this, we just need to check drum clearance.

Thanks
User avatar
Michael Smith
Posts: 457
Joined: Wed Jan 21, 2009 4:54 pm
Club: CASOC
Car#: 21
Location: SFV

Re: Wanted: 13" wheel for test fit

Post by Michael Smith »

what brand.
I have some ARE 13x7 and Web has some 13x7.5 lensos.
As well as 13" honda steelies.
User avatar
Jason Isley BS RX8
Posts: 1129
Joined: Thu May 15, 2008 11:26 am
Car#: 0
Location: Coto de Caza
Contact:

Re: Wanted: 13" wheel for test fit

Post by Jason Isley BS RX8 »

Michael Smith wrote:what brand.
I have some ARE 13x7 and Web has some 13x7.5 lensos.
As well as 13" honda steelies.

The ARE and Lensos would be great. If you want to PM me your address I could get them picked up.
User avatar
Casey Brier
Posts: 341
Joined: Thu May 15, 2008 11:26 am
Club: CASOC
Car#: 806
Location: Beaumont California
Contact:

Re: Wanted: 13" wheel for test fit

Post by Casey Brier »

I have a set of panasports thart I run on, and a set of diampnds that you could barrow doe a longer time if needed.
I'll be at Fontana Sunday if you dont want to drive out to Beaumont. :-)
call me if interested, :thumbup:
"cars...you spend money you don't have, to buy the parts you don't need, to impress the people you don't like....."
Nic Sanchez
Posts: 73
Joined: Tue May 13, 2008 2:54 pm
Club: No$
Car#: 67
Location: La Habra

Re: Wanted: 13" wheel for test fit

Post by Nic Sanchez »

I have some 13x8 Rota you can try. I'm in La Habra.


Nic
Grant Heathman
Posts: 95
Joined: Thu May 15, 2008 11:26 am

Re: Wanted: 13" wheel for test fit

Post by Grant Heathman »

Here in Tustin, got lots of 13" wheels from bmw 2002...
Post Reply