Page 1 of 1
Where I can get some lightweigh spacers for my miata?
Posted: Fri Sep 25, 2009 10:54 am
by Christos Adam
Hi guys
I'm looking for 2x10mm and 2x5mm spacers for my miata but I don't know where to get them from.
Do you have any place to suggest?
Btw the issue is that my rear 275 A6 tires (on 949 15x9 wheels) are rubbing at the top inside the fender wells and also my front ones are rubbing on the sway bar and on the shock top mount.
At the front I'm already using 5mm spacers (Donated by Bill S - Thanks Bill
while at the rear I don't have any.
So the plan is to use the 10mm at the front and try the 5mm at the rear.
Thanks
Chris
Re: Where I can get some lightweigh spacers for my miata?
Posted: Fri Sep 25, 2009 10:58 am
by Mako Koiwai
I get mine over night ... with regular shipping ... from this local place:
http://www.optionsauto.com/products.asp?dept=414
Re: Where I can get some lightweigh spacers for my miata?
Posted: Fri Sep 25, 2009 10:59 am
by Jayson Woodruff
I bet George Doganis has some handy too. All of his race cars (Sentra, CRX and Miata) use the same wheels.
Jay W
Re: Where I can get some lightweigh spacers for my miata?
Posted: Fri Sep 25, 2009 12:29 pm
by Max Hayter
Some of Schenker's old brake rotors?
Re: Where I can get some lightweigh spacers for my miata?
Posted: Fri Sep 25, 2009 12:50 pm
by Jason Isley BS RX8
Are these 4-100?
http://www.blackwatchracing.com/Lotus-W ... p/1065.htm" onclick="window.open(this.href);return false;
Re: Where I can get some lightweigh spacers for my miata?
Posted: Fri Sep 25, 2009 3:19 pm
by Tom Berry
Max Hayter wrote:Some of Schenker's old brake rotors?
That is too funny!
Re: Where I can get some lightweigh spacers for my miata?
Posted: Fri Sep 25, 2009 3:22 pm
by Max Hayter
Tom Berry wrote:
That is too funny!
I'm glad someone got it - my humor is wasted around here for the most part!
Re: Where I can get some lightweigh spacers for my miata?
Posted: Fri Sep 25, 2009 3:38 pm
by Aaron Goldsmith
Max Hayter wrote:Tom Berry wrote:
That is too funny!
I'm glad someone got it - my humor is wasted around here for the most part!
No... we got it.
Re: Where I can get some lightweigh spacers for my miata?
Posted: Fri Sep 25, 2009 3:40 pm
by Max Hayter
Aaron Goldsmith wrote:
No... we got it.
YOU - out of my thread
Wait...wat
Re: Where I can get some lightweigh spacers for my miata?
Posted: Fri Sep 25, 2009 3:43 pm
by Aaron Goldsmith
Max Hayter wrote:Aaron Goldsmith wrote:
No... we got it.
YOU - out of my thread
Wait...wat
Max, you're one of my 2 favorite foreign co-drivers
Re: Where I can get some lightweigh spacers for my miata?
Posted: Fri Sep 25, 2009 3:56 pm
by Sebastian Rios
I have a bunch of cheap universal spacers that you can mix and stack to get the desired spacing. I always have them in my autocross junk, see me this weekend if interested.
Re: Where I can get some lightweigh spacers for my miata?
Posted: Sat Sep 26, 2009 10:42 am
by Craig Naylor
Hey Chris,
Can't tell you what the exact size is I'd guess about 5mm (swing by and check them out Sun afternoon at Cal Speedway). Lightweight alum $5.00 each from a shop in Covina.
Their not pretty, not hub centric, and made for multiple stud diameters/ quantities (then again this gives them less mass, kinda like Bill S's rotors)... but at $5.00 each what do you want?
http://www.tuckertirecompany.com" onclick="window.open(this.href);return false;