oem '03 size C5 Z-06 wheels wanted
Moderators: Mike Simanyi, Anthony P.
- Mako Koiwai
- Posts: 6490
- Joined: Thu May 15, 2008 11:25 am
- Club: SCNAX
- Car#: 34
- Location: South Pasadena, CA
- Contact:
oem '03 size C5 Z-06 wheels wanted
... whatever is light and right
Last edited by Mako Koiwai on Wed Sep 30, 2009 6:27 pm, edited 1 time in total.
-
- Posts: 89
- Joined: Thu May 15, 2008 11:26 am
Re: oem '03 size C5 Z-06 wheels wanted
FYI Mako, only the '01's were forged, '02+ were all cast Speedline wheels and roughly a 1lb lighter per corner.
- Jason Isley BS RX8
- Posts: 1129
- Joined: Thu May 15, 2008 11:26 am
- Car#: 0
- Location: Coto de Caza
- Contact:
Re: oem '03 size C5 Z-06 wheels wanted
The change was made from forged to spun-cast wheels for all 02+ cars because the original manufacturer could not keep up with demand, at one time in 2001 production was even halted because of wheel shortages.
The 02'+ spun-cast wheels are the lighter ones, at -1.3lbs total per set.
Mako, the Corvette Action Center is your friend.
http://www.corvetteactioncenter.com/specs/" onclick="window.open(this.href);return false;
The 02'+ spun-cast wheels are the lighter ones, at -1.3lbs total per set.
Mako, the Corvette Action Center is your friend.
http://www.corvetteactioncenter.com/specs/" onclick="window.open(this.href);return false;
- Kristoffer Gjevre
- Posts: 447
- Joined: Thu May 15, 2008 11:26 am
- Location: SoCal
Re: oem '03 size C5 Z-06 wheels wanted
places to check
http://forums.corvetteforum.com/c5-part ... wanted-53/" onclick="window.open(this.href);return false;
http://www.z06vette.com/forums/f17/" onclick="window.open(this.href);return false;
http://www.corvetteactioncenter.com/for ... le-wanted/" onclick="window.open(this.href);return false;
http://www.digitalcorvettes.com/corvett ... .php/cat/5" onclick="window.open(this.href);return false;
http://corvettemechanic.com/forum/aucti ... tte-parts/" onclick="window.open(this.href);return false;
http://forums.corvetteforum.com/c5-part ... wanted-53/" onclick="window.open(this.href);return false;
http://www.z06vette.com/forums/f17/" onclick="window.open(this.href);return false;
http://www.corvetteactioncenter.com/for ... le-wanted/" onclick="window.open(this.href);return false;
http://www.digitalcorvettes.com/corvett ... .php/cat/5" onclick="window.open(this.href);return false;
http://corvettemechanic.com/forum/aucti ... tte-parts/" onclick="window.open(this.href);return false;
Re: oem '03 size C5 Z-06 wheels wanted
craigslist
ebay
each vette forum has several wheel vendors
avoid replica wheels
ebay
each vette forum has several wheel vendors
avoid replica wheels
- Mako Koiwai
- Posts: 6490
- Joined: Thu May 15, 2008 11:25 am
- Club: SCNAX
- Car#: 34
- Location: South Pasadena, CA
- Contact:
Re: oem '03 size C5 Z-06 wheels wanted
9.5 all 4 corners?Mako Koiwai wrote:So one shouldn't trust these ...
http://cgi.ebay.com/ebaymotors/17-Chrom ... 8051wt_938
Keep looking.
- Mako Koiwai
- Posts: 6490
- Joined: Thu May 15, 2008 11:25 am
- Club: SCNAX
- Car#: 34
- Location: South Pasadena, CA
- Contact:
Re: oem '03 size C5 Z-06 wheels wanted
? Those are of course just the front wheels.
New replacement wheels from GM ... $856 and $886 per ... just as a comparison. Still looking and advertising for used ones on the Vette/Z06 sites. None listed on eBay or Craigs list at the moment.
New replacement wheels from GM ... $856 and $886 per ... just as a comparison. Still looking and advertising for used ones on the Vette/Z06 sites. None listed on eBay or Craigs list at the moment.
Re: oem '03 size C5 Z-06 wheels wanted
The link is to a company (using ebay) listing FOUR 9.5x17 rims (often used by camaro guys). Just be very careful & specific as to what you are getting if you buy online.Mako Koiwai wrote:? Those are of course just the front wheels.
New replacement wheels from GM ... $856 and $886 per ... just as a comparison. Still looking and advertising for used ones on the Vette/Z06 sites. None listed on eBay or Craigs list at the moment.
You really don't want chrome, it adds a lot of weight where you don't want it. Plus replica rims always weigh more even without the chrome. Often as much as 2 lbs per corner for larger rims.
Call these guys, I bought 3 or 4 sets of Vette rims from them. The owner is not "charming" but honest & good prices. His web site is usually out of date, just use telephone - Florida time zone.
http://www.houseofwheelsonline.com/" onclick="window.open(this.href);return false;
561-445-7606

-
- Posts: 50
- Joined: Thu May 15, 2008 11:29 am
- Club: GRA
- Car#: 363
- Location: Fullerton, CA
Re: oem '03 size C5 Z-06 wheels wanted
Mako
Check your PMs...
Check your PMs...
Fullerton Pop Warner.... Earn The Right!
To PLAY with us... you gotta be good
To STAY with us... you gotta be fast
To BEAT us... you gotta be KIDDING!
Fullerton Titans '08
To PLAY with us... you gotta be good
To STAY with us... you gotta be fast
To BEAT us... you gotta be KIDDING!
Fullerton Titans '08