Page 1 of 1

oem '03 size C5 Z-06 wheels wanted

Posted: Tue Sep 29, 2009 11:46 pm
by Mako Koiwai
... whatever is light and right

Re: oem '03 size C5 Z-06 wheels wanted

Posted: Wed Sep 30, 2009 4:47 pm
by Brian Peters
FYI Mako, only the '01's were forged, '02+ were all cast Speedline wheels and roughly a 1lb lighter per corner.

Re: oem '03 size C5 Z-06 wheels wanted

Posted: Wed Sep 30, 2009 4:57 pm
by Jason Isley BS RX8
The change was made from forged to spun-cast wheels for all 02+ cars because the original manufacturer could not keep up with demand, at one time in 2001 production was even halted because of wheel shortages.

The 02'+ spun-cast wheels are the lighter ones, at -1.3lbs total per set.

Mako, the Corvette Action Center is your friend.
http://www.corvetteactioncenter.com/specs/" onclick="window.open(this.href);return false;

Re: oem '03 size C5 Z-06 wheels wanted

Posted: Wed Sep 30, 2009 5:45 pm
by Kristoffer Gjevre
places to check

http://forums.corvetteforum.com/c5-part ... wanted-53/" onclick="window.open(this.href);return false;
http://www.z06vette.com/forums/f17/" onclick="window.open(this.href);return false;
http://www.corvetteactioncenter.com/for ... le-wanted/" onclick="window.open(this.href);return false;
http://www.digitalcorvettes.com/corvett ... .php/cat/5" onclick="window.open(this.href);return false;
http://corvettemechanic.com/forum/aucti ... tte-parts/" onclick="window.open(this.href);return false;

Re: oem '03 size C5 Z-06 wheels wanted

Posted: Thu Oct 01, 2009 8:15 am
by Bob Pl
craigslist
ebay
each vette forum has several wheel vendors
avoid replica wheels

Re: oem '03 size C5 Z-06 wheels wanted

Posted: Thu Oct 29, 2009 12:55 pm
by Mako Koiwai

Re: oem '03 size C5 Z-06 wheels wanted

Posted: Thu Oct 29, 2009 3:18 pm
by Bob Pl
Mako Koiwai wrote:So one shouldn't trust these ...

http://cgi.ebay.com/ebaymotors/17-Chrom ... 8051wt_938
9.5 all 4 corners?

Keep looking.

Re: oem '03 size C5 Z-06 wheels wanted

Posted: Thu Oct 29, 2009 3:27 pm
by Mako Koiwai
? Those are of course just the front wheels.

New replacement wheels from GM ... $856 and $886 per ... just as a comparison. Still looking and advertising for used ones on the Vette/Z06 sites. None listed on eBay or Craigs list at the moment.

Re: oem '03 size C5 Z-06 wheels wanted

Posted: Thu Oct 29, 2009 4:53 pm
by Bob Pl
Mako Koiwai wrote:? Those are of course just the front wheels.

New replacement wheels from GM ... $856 and $886 per ... just as a comparison. Still looking and advertising for used ones on the Vette/Z06 sites. None listed on eBay or Craigs list at the moment.
The link is to a company (using ebay) listing FOUR 9.5x17 rims (often used by camaro guys). Just be very careful & specific as to what you are getting if you buy online.

You really don't want chrome, it adds a lot of weight where you don't want it. Plus replica rims always weigh more even without the chrome. Often as much as 2 lbs per corner for larger rims.

Call these guys, I bought 3 or 4 sets of Vette rims from them. The owner is not "charming" but honest & good prices. His web site is usually out of date, just use telephone - Florida time zone.

http://www.houseofwheelsonline.com/" onclick="window.open(this.href);return false;

561-445-7606

:D

Re: oem '03 size C5 Z-06 wheels wanted

Posted: Mon Nov 30, 2009 12:49 am
by Eric Stanley
Mako
Check your PMs...