Page 1 of 1
Buying a helmet
Posted: Mon Jan 04, 2010 9:50 am
by Mike Settember
I'm looking for a local shop that would carry an assortment of SA rated helmets that I can try on for fitment before I buy. The only places I have found are for motorcycles. Any suggestions?
Re: Buying a helmet
Posted: Mon Jan 04, 2010 10:14 am
by Mako Koiwai
It would help to know what area you live/work in ... unless you don't mind traveling through out S. CA.
Re: Buying a helmet
Posted: Mon Jan 04, 2010 10:22 am
by Aaron Goldsmith
Mako Koiwai wrote:It would help to know what area you live/work in ... unless you don't mind traveling through out S. CA.
Location: Pasadena, CA
Re: Buying a helmet
Posted: Mon Jan 04, 2010 10:24 am
by Mike Settember
Mako Koiwai wrote:It would help to know what area you live/work in ... unless you don't mind traveling through out S. CA.
Sorry, by "locally" I ment in the CSCC Region.
Re: Buying a helmet
Posted: Mon Jan 04, 2010 11:03 am
by Mako Koiwai
Subie Sports in the Anaheim area
WerksII in Burbank:
http://www.yelp.com/biz/werks-2-motorsport-burbank
If you do a Search on this site, you'll come up with a number of similar threads with recommendations
Re: Buying a helmet
Posted: Mon Jan 04, 2010 11:23 am
by Bob Beamesderfer
Sube Sport 17161 Palmdale St. Huntington Beach, Ca 92647
http://www.subesports.com/home/" onclick="window.open(this.href);return false;
Re: Buying a helmet
Posted: Mon Jan 04, 2010 11:34 am
by Mako Koiwai
btw. the Bell Mag and Mag 4 are the most popular AX helmets. No need for a fully enclosed helmet, unless you end up doing track events where it's required. Cooler and for me easier to breath with an open helmet, especially when it starts getting warm.
Re: Buying a helmet
Posted: Mon Jan 04, 2010 12:37 pm
by Bill Martin
Be aware the Snell 2010's are just hitting the shelves. If you buy an 05 you'll lose 5 years of life. But you say you want an SA so I assume for something other than autocross. Some sanctioning bodies require current Snell issue, so be careful what you buy.
Re: Buying a helmet
Posted: Mon Jan 04, 2010 1:21 pm
by Mike Settember
Thanks for the quick response, you gave me the information I needed.