Where to get wheel repaired

[Theo O.]

Can anyone recommend somewhere to get one of my wheels repaired? It has a bend and a hairline crack, still holds air.

Thanks.

[Dan Shaw]

1800 fix a rim. Had some racing beat three piece wheels they did for me that came out great. Resealed/repainted and polished. They're based out of the valley.

[George Schilling]

Straightening and painting is one thing, or actually two things , but I'd be a little leery about that crack Theo.

[Theo O.]

Thanks Dan.

George, yes I'm concerned about that crack, I've been looking for a replacement with no luck. I'm hoping the repair people can tell me if it's not safe to repair it.

[Nicole Wong]

We use Custom Wheel Refinishing for our touring car wheels that get a little mangled. They are in North Hollywood. 818-764-7679

[Theo O.]

We use Custom Wheel Refinishing for our touring car wheels that get a little mangled. They are in North Hollywood. 818-764-7679

Perfect! Thanks Nicole

[Dan Shaw]

here were the wheels when they were done. I have pictures at home of them before the work and I"ll post those when I get home for lunch.

[Dan Shaw]

Pre= repair shots.

[David Crozier]

Hey Theo,

I've used these guys a couple of times. Really excellent work.

Pico Wheel
818-982-0375
13149 Sherman Way Unit A
North Hollywood CA 91605

[Theo O.]

Thanks David!

We missed you last weekend. Work?

[Theo O.]

Hey Theo,

I've used these guys a couple of times. Really excellent work.

Pico Wheel
818-982-0375
13149 Sherman Way Unit A
North Hollywood CA 91605

Just dropped off the wheel, really nice guys.

[David Crozier]

Yeah I was in phx doing a gig last weekend. Sorry I had to miss the event, but it's good to be working.

Hopefully see you at the next one.

[Theo O.]

Got the wheels back. The shop did a nice job.

[Bob Pl]

Got the wheels back. The shop did a nice job.

Let us know how they balance & then how they feel when driving. I had one repaired that involved welding / grinding etc. It looked great, but took a LOT of weight & never felt right on the car. Hope yours comes out better than mine did.

[David Crandon]

Here's one more place in Orange County. Al Reed has been doing this in So Cal for about 30-40 yrs. Longer than anybody. The national porchse club guys send their wheels to him for repair. Penske used him for refinishing back in the 90's when they raced at the Long Beach Grand Prix.

AL REED POLISHING 3010 E. Coronado #A, Anaheim, CA 92806 (714) 632-3907

[Theo O.]

Got the wheels back. The shop did a nice job.

Let us know how they balance & then how they feel when driving. I had one repaired that involved welding / grinding etc. It looked great, but took a LOT of weight & never felt right on the car. Hope yours comes out better than mine did.

Bob, wheel came back great, couldn't tell that it was repaired. Drove on it to and back from ProSolo in Utah with no issues.

[Theo O.]

Here's one more place in Orange County. Al Reed has been doing this in So Cal for about 30-40 yrs. Longer than anybody. The national porchse club guys send their wheels to him for repair. Penske used him for refinishing back in the 90's when they raced at the Long Beach Grand Prix.

AL REED POLISHING 3010 E. Coronado #A, Anaheim, CA 92806 (714) 632-3907

David, thanks for providing more option, I'm sure someone will need to reference this post in the future.

[Toby Larsson]

Here's one more place in Orange County. Al Reed has been doing this in So Cal for about 30-40 yrs. Longer than anybody. The national porchse club guys send their wheels to him for repair. Penske used him for refinishing back in the 90's when they raced at the Long Beach Grand Prix.

AL REED POLISHING 3010 E. Coronado #A, Anaheim, CA 92806 (714) 632-3907

I've been sending my customers to Al for years, does an amazing job. Mike S just had a set done for his M coupe by Al.

[Mako Koiwai]

Any idea how much for a polish cleaning on a set of wheels?

Can one have alu wheels polished to the bare metal ... and then what? Do they need to be clear coated or can one just leave as is. Wax?

I think our CCW's Vette wheels are just polished aluminum. Love that look. Could one do that to a set of oem Z06 wheels?

[Bob Pl]

Got the wheels back. The shop did a nice job.

Let us know how they balance & then how they feel when driving. I had one repaired that involved welding / grinding etc. It looked great, but took a LOT of weight & never felt right on the car. Hope yours comes out better than mine did.

Bob, wheel came back great, couldn't tell that it was repaired. Drove on it to and back from ProSolo in Utah with no issues.

Glad it worked out.