Page 1 of 1
WTB: 18x8 wheels (Rx-8 size)
Posted: Sat Jun 21, 2014 2:22 pm
by Fred Sullivan
Looking to buy a set of 18x8 wheels:
50mm offset,
67.1mm center bore,
5x4.5 (114.3mm) bolt pattern.
I believe these are the specs, pulled from the internet. I haven't had a chance to measure them yet, just got the car. These are stock size Rx8 wheels. If you have anything laying around I'm interested.
Thanks,
Freddie.
Re: WTB: 18x8 wheels (Rx-8 size)
Posted: Sat Jun 21, 2014 3:01 pm
by Jeff Stuart
PM'd you!
Re: WTB: 18x8 wheels (Rx-8 size)
Posted: Tue Jun 24, 2014 1:28 pm
by Marc Leininger
Re: WTB: 18x8 wheels (Rx-8 size)
Posted: Tue Jun 24, 2014 7:30 pm
by Craig Naylor
Interesting item on their web site:
New! Closed-End
Racing Lug Nut(Aluminum Type)
...provides an average 52% weight reduction compared to conventional steel lug nuts. (only weigh 22grams vs. 44grams avg steel per their own claims)
- Not recommend using...
actual competition use.
Racing Lug nut... not for actual competition use!
Wow you saved less than 1/5 lbs per corner, but then you can't go race!
Re: WTB: 18x8 wheels (Rx-8 size)
Posted: Sat Jun 28, 2014 11:49 pm
by Fred Sullivan
Hey Jeff, I Pm'd you about the wheels. I am interested, but not sure if you got it.
Marc, if the wheels fall through with Jeff do I order them through you or one of your distributors?
Re: WTB: 18x8 wheels (Rx-8 size)
Posted: Sun Jun 29, 2014 2:56 pm
by Steve O'Blenes
I have 18x8 Rota wheels in black with toyo tires on them, two should have tires replaced. They are factory RX8 offset within 1/4 inch if not exact. Very light wheels. Give me a call at 714-448 one seven two four for more details.
Steve O'Blenes
Re: WTB: 18x8 wheels (Rx-8 size)
Posted: Fri Jul 11, 2014 1:20 pm
by Marc Leininger
Hi Fred,
If you interested in getting the wheels from me let me know, I'm sure we can get you taken care of one way or another.
Thanks,
Marc
Re: WTB: 18x8 wheels (Rx-8 size)
Posted: Fri Jul 11, 2014 7:28 pm
by Fred Sullivan
Thanks for checking in Marc, I picked up a set of wheels.
