WTB: 18x8 wheels (Rx-8 size)

[Fred Sullivan]

Looking to buy a set of 18x8 wheels:
50mm offset,
67.1mm center bore,
5x4.5 (114.3mm) bolt pattern.

I believe these are the specs, pulled from the internet. I haven't had a chance to measure them yet, just got the car. These are stock size Rx8 wheels. If you have anything laying around I'm interested.

Thanks,
Freddie.

[Jeff Stuart]

PM'd you!

[Marc Leininger]

http://www.wedswheelsna.com/weds/wedssport/

uh... uhhhh.....

[Craig Naylor]

http://www.wedswheelsna.com/weds/wedssport/

Interesting item on their web site:
New! Closed-End Racing Lug Nut(Aluminum Type)

...provides an average 52% weight reduction compared to conventional steel lug nuts. (only weigh 22grams vs. 44grams avg steel per their own claims)

- Not recommend using... actual competition use.

Racing Lug nut... not for actual competition use!

Wow you saved less than 1/5 lbs per corner, but then you can't go race!

[Fred Sullivan]

Hey Jeff, I Pm'd you about the wheels. I am interested, but not sure if you got it.

Marc, if the wheels fall through with Jeff do I order them through you or one of your distributors?

[Steve O'Blenes]

I have 18x8 Rota wheels in black with toyo tires on them, two should have tires replaced. They are factory RX8 offset within 1/4 inch if not exact. Very light wheels. Give me a call at 714-448 one seven two four for more details.

Steve O'Blenes

[Marc Leininger]

Hi Fred,

If you interested in getting the wheels from me let me know, I'm sure we can get you taken care of one way or another.

Thanks,
Marc

[Fred Sullivan]

Thanks for checking in Marc, I picked up a set of wheels.